Kontakt

Har du spørgsmål? Udfyld formularen nedenfor og vi vil kontakte dig så snart vi kan!

Eller giv os et kald

Sven Eriksson, Simulation Specialist
Sven Eriksson Simulation Specialist E-mailSven.Eriksson@symetri.com Telefon+46 8 704 80 20
Wasim Younis, Simulation Specialist
Wasim Younis Simulation Specialist E-mailwasim.younis@symetri.com Telefon+44 7980 735244
Not found image

februar 2017 - Simulation

Simulation webinars: Digital simulation reduces costs and shortens time from plan to product

Interested in Simulation? You can watch our recorded webinars around Bolt, Stress, Frame, Plastic analysis, and Electronics cooling and much more.

Autodesk® Nastran® In-CAD™ software, a CAD-embedded general purpose finite element analysis (FEA) tool powered by the Autodesk® Nastran® solver, offers a wide range of simulation for multiple analysis types. This includes Bolt-Preloads, Fatigue, Thermal, Drop Test, Elastic-Plastic analysis and much more and all from within the familiar Inventor User interface.

In addition to Nastran® In-CAD™ you can watch recorded webinars on Autodesk Simulation CFD and Moldflow software, Including Inventor Simulation, including Frame Analysis and Dynamic Simulation.

 

  Nastran In-CAD - Bolt Analysis

Use Nastran In-CAD for advanced simulation handling non-linear problems, advanced dynamics, heat transfer, fatigue and more. In this webinar a joint with preloaded bolts is shown.

You can watch the recorded webinar here.

 

  Inventor Professional - Stress Analysis

See the powerful FEA-tool inside Inventor. It handles with ease large assemblies as well as complex contact problems.                                                  

You can watch the recorded webinar here.

 

 
  Inventor Professional Frame Analysis

Make fast and accurate simulations of frame structures inside inventor. See stresses, deformations, and diagrams of bending and shear.     

You can watch the recorded webinar here.

 
   

 

 
  Simulation CFD – Valves

Predict pressure drop and perform a design optimization in a valve using Simulation CFD. Verify that there is no risk for cavitations.

You can watch the recorded webinar here.

 

 
  Inventor Professional – Dynamic Simulation 

Analyse the dynamic behaviour of a hinged structure. Calculate movements, reaction forces and moments in hinges and joints. Reactions can later be lifted to Inventor Stress Analysis to make a FEA-simulation.

You can watch the recorded webinar here.

 


 

 

Nastran In-CAD - Buckling

Use Nastran In-CAD to calculate the critical buckling load of a structure. In the webinar a linear analysis is shown, but it can also be made non-linear.

You can watch the recorded webinar here.

 

 
  Nastran In-CAD – Plastic Analysis

This webinar focuses on performing a non-linear plastic analysis to be able to evaluate a model after yield limit of the material is reached.

You can watch the recorded webinar here.

 

 
  Nastran In-CAD – Fatigue

Predict the components fatigue life based on static or dynamic loading to avoid fatigue failure, the currently most common cause of failure.

You can watch the recorded webinar here.

 
   

 

 
  Simulation CFD – Electronics Cooling

Use Simulation CFD to investigate how your electronic device behaves and if its components are sufficiently cooled. Avoid late and costly redesigns.

You can watch the recorded webinar here.

 

 
  Nastran In-CAD - Thermal Stress

This webinar focuses on doing a heat analysis in Nastran In-CAD and using the resulting data to evaluate thermal stresses.

You can watch the recorded webinar here.

 

 
  Nastran In-CAD - Vibration Analysis

Evaluate your design according to the required mechanical environmental standards. Avoid costly and time consuming physical tests that might destroy your prototypes.

You can watch the recorded webinar here.

 

 
  Simulation CFD –
Centrifugal Pump                                   

This webinar utilizes Simulation CFD Motion to simulate pressure-driven flow through a centrifugal pump. Calculate the complete pump curve from maximum flow to maximum pressure. 

You can watch the recorded webinar here.

Kontakt

Sven Eriksson, Simulation Specialist
Sven Eriksson Simulation Specialist E-mailSven.Eriksson@symetri.com Telefon+46 8 704 80 20
Wasim Younis, Simulation Specialist
Wasim Younis Simulation Specialist E-mailwasim.younis@symetri.com Telefon+44 7980 735244